Mould laser welding microscope and regulation skills

Microscope for mold laser welding machine, it may be vital. If you do not clear or accurate, it will inevitably affect the quality of welding results. Why then the regulation, how to use it? Engineers have given their use and regulation techniques.

Before welding operation, clear scheduling section knob clockwise to the first eyepiece barrel outside of the rotation in the end, so that the two eyepiece with a height. This is observed when the workpiece to two glasses to see the sharpness consistency. When operating the workpiece on the table, the table moves up and down, by looking at the work in a microscope, the workpiece is most clearly state in the field of view of the microscope. When we welding any workpiece, are to be in the clear state, one is the clarity to ensure compliance with the height of the focal length, the second is the eye can clearly see the welding process to ensure the quality of welding.

When welding, urged customers to use a microscope must use two eyes while observing the workpiece, the eyes do not live close to the eyepiece, also not far from the eyepiece, probably maintain about 5-10 mm. When the field of view can not be coincidence to see, you can adjust the microscope eyepiece two seats, so that the distance from the two eyepieces and two pupils themselves consistent, two fields of view coincide until seen together. The reason to use two eyes while observing, just to the work we can see a three-dimensional sense. Able to see the position of the workpiece on the level of, in particular, the position of small precision parts able to see clearly. And the workpiece can be checked after the welding, welding position to observe whether undercuts or burning, welding position and height in order to ensure compliance with the requirements.